You Are Here: Home » RMNP News » Incident On Farview Curve Project In Rocky Mountain National Park

Incident On Farview Curve Project In Rocky Mountain National Park

Photo courtesy RMNP

At 2:30 p.m. on Sunday, July 31, an operator driving an excavator affiliated with the contractor working on the Farview Curve Overlook Parking Area in Rocky Mountain National Park was involved in an accident.

The excavator dropped four to five feet off the edge of the road and rolled on its side. The fifty-five year old man operating the equipment had minor injuries and was treated on scene. Grand Lake Fire assisted with the initial clean-up of a small amount of hazardous materials that spilled during the incident. The cause of the accident is still being determined.

On Monday, August 1, the excavator will be removed from the side of the road by a crane. Visitors should expect some traffic delays through that section of Trail Ridge Road while the operation is underway.

Farview Curve is located on Trail Ridge Road on the west side of Rocky Mountain National Park. Farview Curve (10,120 feet) is 14.1 miles north of the Kawuneeche Visitor Center. Due to heavy snow loads this year the historic rock wall has failed at Farview Curve. This spring, large cracks were observed and the wall has developed a significant tilt. On July 25, erosion control began around the wall, followed by the demolition of the existing wall footings, sidewalk and adjacent asphalt. The contractor was working on the sub-excavation and backfill operations when the incident occurred.

© 2014 Estes Park News, Inc

Scroll to top